AT 1300 – PROTEK SERIES

Overview

AT 1300 ProTek Series offers unparalleled protection of electronic components from heat, moisture, and other contaminants. The AT 1300 series has been specifically formulated for use on electronics. All AT 1300 Series coatings are fluoropolymer free. The coatings are easy to apply and offer best in class moisture protection. The AT 1300 ProTek Series have been specifically designed to quickly and efficiently conduct heat making them the perfect coating for systems requiring thermal energy to be transmitted away from vulnerable components. Available in clear and black.

Proudly manufactured in the USA.

IndustriesElectronics

Tech Specs

Color
Clear
Viscosity
12 sec. #2 Zahn
Percent of Solids (%) – AT – 1300
12
Percent of Solids (%) – AT – 1301
18
Percent of Solids (%) – AT – 1302
20
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F (648.8°C)
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Thermal management via thermal transfer.
Electrically non-conductive.
Highly hydrophobic.
Extreme anti-corrosion.
Excellent adhesion.
Ultra thin film thickness (2 – 10 microns) Available in clear, semi-clear and black.
One component coatings.
Applied via spray, wipe or dipping.
Quick drying with ambient air cure (accelerated heated curing possible).
Single coat required for vast majority of applications.
No odor or fumes when heated.
Inert material once cured.
Environmentally friendly – contains no fluorocarbons.
RoHS, REACH and WEEE compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 10 microns

Estimated Coverage Rate (18% solids @ 3 microns)

2,450 ft² (230 m²) per gallon

*Substrate profile will vary results

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

Ambient Cure (Full Properties)

35-45 minutes (24 hours for best performance)

Supplemental Information

AT 1300 Series have the same basic application, hydrophobic and adhesion properties. Some formulations have higher solids content that result in higher dry film thickness and therefore maximizes water resistance and thermal properties. Contact your AlphaTek representative for further information.

Common Applications

  • PCBAs / electronic circuit boards
  • Consumer Electronics
  • Wearables
  • Optics
  • Micro-motors
  • Connectors
  • Sensors

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.