Products
High-performance coatings, films, membranes, and composites.
EVOTIS is a thin-profile, flexible composite for best-in-class thermal insulation performance at ultra high temperatures. EVOTIS1300 is suitable for operating temperatures of up to 1300°C (2372°F) and does not burn, smoke or cause flame spread. EVOTIS1260 is suitable for operating temperatures of up to 1260°C (2300°F) and has minimal dusting with great workability. EVOTIS products are available in rolls with thicknesses of 0.5mm to 3mm.
Polarthin is a cutting edge aerogel fabric with up to 4 times the thermal insulation performance vs. traditional synthetic insulation materials. Polarthin has been specifically engineered for use in performance clothing and cryogenic applications. It is dust free, stretchable, highly flexible, waterproof, and easy to cut.
AT 1300AG
AT 1300 AG Series offers unparalleled protection of electronic components from heat, moisture, and other contaminants. The AT 1300AG Series has been specifically formulated for use on electronics. All AT 1300AG Series coatings are fluoropolymer free. The coatings are easy to apply and offer best in class moisture protection. The AT 1300AG Insulation Series have been specifically designed to effectively block thermal energy. These coatings are extremely effective for systems requiring thermal energy to be blocked to protect vulnerable components. Available in both clear and black.
AT 4410
AT 4410 - High Temperature Thermal Protection Coating is a high performance protective coating formulated to reduce radiated heat. AT–4410 is extremely durable and provides best in class thermal protection at temperatures of up to 1600°F (871°C). AT 4410 may be applied to almost any metal, composite, or semi-rigid plastic substrate. It is an easy to apply one-component formulation. AT 4410 is solvent based, VOC exempt and environmentally friendly. It provides excellent corrosion resistance. AT 4410 is designed for use on automotive components such as engine headers, engine manifolds, exhaust pipes, heat shields, exhaust mufflers and catalytic converters. It is also very effective on aircraft engine components.
AT 4440
AT-4440 Epoxy Ceramic Coating is a unique high performance coating that offers best in class insulation, anti-corrosion and moisture protection performance. AT-4440 is effective in extreme operating temperatures (-92°F to 300°F) without losing flexibility or cracking. AT-4440 has excellent sound attenuation. AT-4440 creates a continuous waterproof film barrier. Applied properly, AT-4440 protects against damage from standing water and can remain under water permanently with no harm to the coating. AT-4440 adheres to practically all surfaces with remarkable flexibility. The coating is easy to apply in a broad range of environments.
AT 1300
AT 1300 ProTek Series offers unparalleled protection of electronic components from heat, moisture, and other contaminants. The AT 1300 series has been specifically formulated for use on electronics. All AT 1300 Series coatings are fluoropolymer free. The coatings are easy to apply and offer best in class moisture protection. The AT 1300 ProTek Series have been specifically designed to quickly and efficiently conduct heat making them the perfect coating for systems requiring thermal energy to be transmitted away from vulnerable components. Available in clear and black.
AT 1180
AT 1180 - AlphaProof WB is a water-based, non-flammable hydrophobic coating for use on fabrics and fibrous materials. AT 1180 creates an intrinsic bond to the substrate and penetrates deep in the fibers for maximum long-term performance. Treated materials become hydrophobic and UV resistant. AT 1180 leaves treated fabrics soft, supple and breathable. AT 1180 is perfectly suited to water-proof fibrous cloth or as a water-repellent layer on hard plastics and other surfaces to prevent a build-up of water, ice or snow.
AT 1181
AT 1181 - AlphaProof SB is a VOC exempt, environmentally friendly solvent based coating that creates an extremely water repellant hydrophobic surface. Treated fabrics will shed water quickly while remaining breathable. AT 1181 is UV resistant and has no residual odor. Treated fabrics remain very soft and flexible. AT 1181 bonds with fibers to create long-term durable performance and enhanced tensile strength. Treated fibers are covered in a self-lubricating dry film that reduces friction to improve performance and reduce wear. AT 1181 is non-flammable and will decrease flame spread in treated fabrics.
AT 5000
AT-5000 AlphaSlick Wipe is an easy to apply nano-ceramic finish that makes treated surfaces extremely slick/hydrophobic. It has excellent self-cleaning properties because dirt, ice or snow will not attach to the hydrophobic surface. The dry film is optically clear and therefore perfect for glass and mirrored surfaces. It keeps glass and mirrors clear, easy to clean and prevents fogging. Once cured, AT-5000 provides excellent UV protection and can withstand extreme hot and cold temperatures making it the perfect solution for protecting a wide variety of surfaces from weathering. AT-5000 will significantly reduce friction and drag in water or air. AT-5000 is safe to use on food surfaces (once cured).
AT 5001
AT-5001 AlphaSlick Spray is an easy to apply nano-ceramic finish that makes treated surfaces extremely slick/hydrophobic. It has excellent self-cleaning properties because dirt, ice or snow will not attach to the hydrophobic surface. The dry film is optically clear and therefore perfect for glass and mirrored surfaces. It keeps glass and mirrors clear, easy to clean and prevents fogging. Once cured, AT-5001 provides excellent UV protection and can withstand extreme hot and cold temperatures making it the perfect solution for protecting a wide variety of surfaces from weathering. AT-5001 will significantly reduce friction and drag in water or air. AT-5001 is safe to use on food surfaces (once cured).
AT 5002
AT-5002 AlphaSlick Extreme is a high performance nano-ceramic coating that creates a hard, super slick, long lasting hydrophobic clear finish. AT-5002 significantly reduces drag on treated surfaces in water, air or other mediums. This will improve energy efficiency, speed, lift and maneuverability of both marine vehicles and aircraft. Treated surfaces also become self-cleaning and will repel water, ice, snow, dirt, marine organisms, etc. AT-5002 is extremely durable and provides excellent UV protection. Surfaces are left with a super glossy finish. AT-5002 is an inert (benign) material that is safe for use in marine environments.
AT 5003
AT–5003 AlphaSlick Green is a VOC exempt, environmentally friendly solvent based hydrophobic coatings specifically formulated for maximum performance on greenhouses and solar panels. AT-5003 has excellent adhesion, UV resistance and durability. It creates a micro-thin, super-slick hydrophobic surface that prevents the adhesion of ice, dirt, debris, mold, snow, etc. from treated surfaces. This creates a self-cleaning surface that increases performance while minimizing ongoing maintenance. AT-5003 has been specifically formulated for use on greenhouses and solar panels. In addition to its self-cleaning properties, AT-5003 increases the amount of solar energy that passes through glass and clear surfaces.
AT 1400
AT 1400 - AlphaShield gun coating is the premium high performance protective coating for firearms. The coating is tough, durable and provides long term protection against corrosion, weathering, and abrasion. It may be applied to metal and non-metal surfaces. Coating is thermally stable to extreme temperatures (1200°F+/648°C+) and it retains adhesion even after multiple thermal cycles.
AT 1405
AT 1405 - AlphaShield Grip has all the high performance of AT 1400 with the additional benefit of AT’s proprietary Wet Grip Technology. AT 1405 feels smooth to the touch but the wetter it gets, the better the grip. The coating is tough, durable and provides long term protection against corrosion, weathering, and abrasion. It may be applied to metal and non-metal surfaces. Coating is thermally stable to extreme temperatures (1200°F+/648°C+) and it retains adhesion even after multiple thermal cycles. Unlike most competing products, AT 1405 also offers high temperature insulation performance in additional to high temperature protection.
AT 1410
AT 1410 - AlphaShield Ultra gun coating is the maximum performance protective coating for firearms available to the civilian market. The coating is tough, durable and provides long term protection against corrosion, weathering, and abrasion. It may be applied to metal and non-metal surfaces. Coating is thermally stable to extreme temperatures (1200°F+/648°C+) and it retains adhesion even after multiple thermal cycles. Unlike most competing products, AT 1410 also offers insulation performance in addition to high temperature protection.
AT 1420
AT-1420 AlphaShield Elite is a high-performance nanoceramic firearm coating engineered for military small arms and crew-served weapon applications. Formulated to conform to the near-infrared (NIR) reflectance requirements of MIL-DTL-53039E, the AT-1420 supports night-vision signature management on military weapon systems while delivering exceptional thermal protection, durability, and corrosion resistance. Unlike conventional firearm coatings, the AT-1420 combines NIR signature management with high-temperature insulation performance.
AT 1450
AT 1450 is the ultimate protective coating for gun bores. It is easy to apply and creates a micron thin, protective ceramic coating on the bore. AT 1450 creates a permanent, significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. AT 1450 protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. AT 1450 is effective on all types of firearms including rifles, handguns, shotguns and muzzle-loaders.
AT 1455
AT 1455 is the ultimate protective coating for gun and firearm parts. It is clear, slick, highly durable, and provides unmatched anti-corrosion protection. AT 1455 is the perfect non-oil lubricant for maximum long-term performance. The coating may be placed on virtually any polymer or metal component in a firearm. Coated surfaces will not collect dust or grime like with oiled components. Moving components will stay slick and efficient in even the most challenging environments. AT 1455 is easy to apply and a single application provides long lasting protection.
AT 601
AT 601 - Wood Shield is a VOC exempt, environmentally friendly solvent based hydrophobic coating specifically formulated for maximum performance on wood surfaces. AT 601 is UV resistant and highly durable. AT 601 is extremely hydrophobic making it an ideal water repellant coating. Treated wood surfaces will repel water, ice, snow, dirt, etc. thereby reducing maintenance and extending the life of wood finishes. AT 601 absorbs deeply into the pores of wood surfaces for long lasting protection and a glossy finish. AT 601 is also very effective as a sealer over existing wood finishes. AT 601 is odor free once cured and is safe for use in marine environments.
AT 602
AT–602 Marble Shield is a high performance, single component coating that creates a glossy, protective finish on granite, marble and similar surfaces. The hydrophobic properties repel water and dirt, making cleaning and maintenance easy while also extending the life of granite and marble surfaces. AT 602 protects treated surfaces from UV damage and most common chemicals. AT 602 creates a covalent bond to the substrate to provide long lasting protection. The coating does not sit on the surface but rather soaks in for long-term performance. AT 602 is an extremely safe, inert material when cured. It is safe for use on food contact surfaces. It is odor free once the coating has cured.
AT 603
AT 603 - Marble Shield Extreme is an even higher performing version of AT 602 specifically created for professional use. The coating creates a glossy, protective finish on granite, marble and similar surfaces. The hydrophobic properties repel water and dirt making cleaning and maintenance easy while also extending the life of granite and marble surfaces. AT 603 protects treated surfaces from UV damage and most common chemicals. AT 603 creates a covalent bond to the substrate to provide long lasting protection. The coating does not sit on the surface but rather soaks in for long-term performance. AT 603 is an extremely safe, inert material when cured. It is safe for use on food contact surfaces. It is odor free once the coating has cured.
AT 1670
AT 1670 is a high performance, single component coating specifically designed to protect and revitalize industrial blades. It creates a thin, incredibly durable ceramic protective layer on cutting surfaces. It revitalizes cutting surfaces by smoothing out imperfections caused by past corrosion pitting, uneven abrasion wear and general wear & tear. This creates a sharper, more efficient cutting surface. Secondly, the ceramic surface coating will protect the blade from future damage. The overall result is a sharper, more efficient cutting tool that performs better, lasts longer and requires less maintenance. AT 1670 is easily applied by wipe in ambient conditions.
AT 1671
AT 1671 is a high performance, single component coating specifically designed to maximize the performance of cutting surfaces and blades. AT 1671 creates a thin ceramic barrier that reduces friction and improves cutting efficiency. Coated blades will resist the build up of glues and other adhesives keeping the cutting surface clean and effective. AT 1671 is easily applied by wipe in ambient conditions.
AT 2600
AT 2600 - AlphaTek Mold Release coating revolutionizes composites manufacturing. It maximize ROI via a simple to apply coating that improves both the efficiency and longevity of molds. It results in faster cycle times due to easier release. AT 2600 drives more cycles without cleaning or re-coating. No free silicones means no contamination of molded components. AT 2600 works with all common high temperature resin systems and all common industrial-molding technologies.
AT 2620
AT 2620 - AlphaTek Mold Repair coating rejuvenates and repairs all types of industrial molds. AT 2620 permanently fills and seals pinholes and micro-cracks on the face side of almost any mold. Ultra-thin application means no change to the mold dimensions. AT 2620 significantly improves the ROI for any molding tool by extending the useful life of the mold and repairing molds that would otherwise be inoperable. Available with optional black light tracer to enable easy inspection of coating coverage.
AT 510
AT 510 - AlphaTek Primer is a VOC exempt, solvent based, hybrid-ceramic clear primer that provides adhesion in a wide variety of demanding environments. It adheres to almost anything and almost anything will adhere to it. AT 510 can be used as a primer on almost any substrate or as an intra-coating adhesive. AT 510 is tough, durable and adheres to almost any surface. This coating is suitable for operating temperatures of up to 148°F (64.8°C).
AT 520
AT 520 - AlphaTek Primer Extreme is a high performance primer specifically formulated for ultra high temperature applications (up to 1200°F/648°C). It is a VOC exempt, solvent-based primer that provides adhesion in a wide variety of demanding environments. It adheres to almost anything and almost anything will adhere to it. AT 520 can be used as a primer on almost any substrate or as an intra-coating adhesive. AT 520 has been formulated for a broad range of uses including automotive exhaust pipes and direct flame contact.
AT 1620
AT 1620 is a FDA compliant base coat sealer for porous metal cooking surfaces (e.g. grills, wire screens, etc.). AT 1620 is generally used as a primer / sealer. Apply AT 1660 to create a non-stick surface. AT 1620 is easily applied and cures under ambient conditions. It has excellent adhesion and provides long-term performance. AT 1620 is inert (benign) material when cured. Cured coating is free from any harmful fumes.
AT 1660
AT 1660 is a FDA compliant food safe non-stick coating suitable for a wide range of cookware. Treated surfaces are exceptionally easy to clean without scrubbing or abrasive tools. AT 1660 also creates a more uniform thermal transfer for better cooking results. AT 1660 is easy to apply and extremely durable. Surfaces may be easily re-coated when required. AT 1660 cures under ambient conditions.
AT 1661
AT 1661 is a FDA compliant food safe non-stick coating suitable for use on cutting instruments and blades. AT 1661 reduces drag, keeps edges sharper longer and prevents corrosion without the need for oil. Treated blades work better for longer with less need for maintenance. AT 1661 is easy to apply and extremely durable. Surfaces may be easily re-coated when required.