Primers

AT 510

ALPHATEK PRIMER

AT 510 – ALPHATEK PRIMER

Overview

AT 510 - AlphaTek Primer is a VOC exempt, solvent based, hybrid-ceramic clear primer that provides adhesion in a wide variety of demanding environments. It adheres to almost anything and almost anything will adhere to it. AT 510 can be used as a primer on almost any substrate or as an intra-coating adhesive. AT 510 is tough, durable and adheres to almost any surface. This coating is suitable for operating temperatures of up to 148°F (64.8°C).

Proudly manufactured in the USA.

Tech Specs

Color
Colorless Liquid
Viscosity (ASTM D1084B)
1.0 cps @ 74°F (23°C)
Percent of Solids (%)
<38
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability. Resin (cured)
1200°F + (648.8°C +)
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Specific Gravity (ASTM D891-09)
0.810
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Excellent adhesion to almost any surface.
Creates an intrinsic covalent bond with most substrates.
Compatible with most topcoats.
Remains flexible.
Smooth, clear finish.
High operating temperature.
Effective for both hot and cold applications.
Thin application.
Excellent coverage rate.
Easily applied by wipe or spray.
Ambient cure, short dry time.
Environmentally friendly. VOC exempt.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

1 to 3 micron

Estimated Coverage Rate (@3 microns)

5,200 ft² (480 m²) per gallon

Dry Time (@ 65-70°F / 18-21°C)

5 – 10 minutes

Supplemental Information

  • For higher temperature applications, use AT 520.
  • AT 510 is compatible with AlphaTek’s complete line of Nano-Ceramic Clear and Color Coatings as well as most commercial coatings found in the market. Contact your AlphaTek representative for more information.

Common Applications

  • As a primer to provide adhesion for a topcoat, particularly when the substrate cannot be cleaned of all contaminants prior to coating (e.g. waxes or silicones) or the desired topcoat lacks adhesion.
  • Intra-coating adhesive to allow the build of multiple layers of other coating products.

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.