Thermal Heat Insulation

AT 1300AG

PROTEK AG SERIES

AT 1300AG – PROTEK AG SERIES

Overview

AT 1300 AG Series offers unparalleled protection of electronic components from heat, moisture, and other contaminants. The AT 1300AG Series has been specifically formulated for use on electronics. All AT 1300AG Series coatings are fluoropolymer free. The coatings are easy to apply and offer best in class moisture protection. The AT 1300AG Insulation Series have been specifically designed to effectively block thermal energy. These coatings are extremely effective for systems requiring thermal energy to be blocked to protect vulnerable components. Available in both clear and black.

Proudly manufactured in the USA.

IndustriesElectronics

Tech Specs

Color
Opaque (Semi-Clear) or Black
Viscosity
20 – 30 sec. #2 Zahn
Percent of Solids (%) – AT – 1304AG
24
Percent of Solids (%) – AT – 1305AG
28
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1600°F (871.1°C)
Conical Bend (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Direct Impact (ASTM D2794-93)
130lbs
Specific Gravity (ASTM D891-09)
1.04 ± 2%
Pencil Hardness (ASTM D3363)
7h (Ambient Cure)
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Thermal management via thermal insulation.
Electrically non-conductive
Highly hydrophobic.
Extreme anti-corrosion.
Excellent adhesion.
Thin film thickness (12 – 25 microns) Available in clear, semi-clear and black.
One component coatings.
Applied via spray, wipe or dipping.
Quick drying with ambient air cure (accelerated heated curing possible).
Single coat required for vast majority of applications.
No odor or fumes when heated.
Inert material once cured.
Environmentally friendly – contains no fluorocarbons.
RoHS, REACH and WEEE compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

12 to 25 microns

Estimated Coverage Rate (@15 microns)

650 ft² (60 m²) per gallon

Estimated Coverage Rate (@25 microns)

460 ft² (42 m²) per gallon

Ambient Cure (@ 75 ° F (23.8 ° C))

5 days

Supplemental Information

AT 1300AG Series coatings have the same basic application, hydrophobic and adhesion properties. Some formulations have higher solids content that result in higher dry film thickness and therefore maximizes water resistance and thermal protection. Contact your AlphaTek representative for further information.

Common Applications

  • PCBAs / electronic circuit boards
  • Consumer Electronics
  • Wearables
  • Optics
  • Micro-motors
  • Connectors
  • Sensors

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.