Thermal Heat Insulation

AT 4410

HIGH TEMPERATURE THERMAL PROTECTION COATING

AT 4410 – HIGH TEMPERATURE THERMAL PROTECTION COATING

Overview

AT 4410 - High Temperature Thermal Protection Coating is a high performance protective coating formulated to reduce radiated heat. AT–4410 is extremely durable and provides best in class thermal protection at temperatures of up to 1600°F (871°C). AT 4410 may be applied to almost any metal, composite, or semi-rigid plastic substrate. It is an easy to apply one-component formulation. AT 4410 is solvent based, VOC exempt and environmentally friendly. It provides excellent corrosion resistance. AT 4410 is designed for use on automotive components such as engine headers, engine manifolds, exhaust pipes, heat shields, exhaust mufflers and catalytic converters. It is also very effective on aircraft engine components.

Proudly manufactured in the USA.

Tech Specs

Color
Opaque (Solid Tone)
Viscosity
20-23 sec. #2 Zahn
Percent of Solids (%)
65-75 ± 2
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
>1600°F + (>871.1°C +)
Salt Spray ASTM B117
3500 hrs +
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359-02)
5B
Direct Impact (ASTM D2794-93)
130 lbs
Specific Gravity (ASTM D891-09)
1.04 ± 2%
Pencil Hardness (ASTM D3363)
9h (Ambient Cure)
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

High performance single component coating.
Extreme adhesion. Forms covalent bond to the substrate giving it an intrinsic bond to surfaces.
Bonds to all metals, composites, semi-rigid plastics and many other substrate types.
Excellent thermal protection.
Unparalleled durability. Excellent chemical and abrasion resistance.
Excellent anti-corrosion performance.
Extremely high operating temperature.
Thin application (0.4 to 1.0 mil / 10–25 micron dry film thickness).
Easy to apply. Curable by ambient air (accelerated oven curing possible).
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

20 to 25 microns

Estimated Coverage Rate (@ 20 microns)

1,425 ft² (130 m²) per gallon

Estimated Coverage Rate (@ 25 microns)

1,140 ft² (105 m²) per gallon

Ambient Cure (@ 75 ° F (23.8 ° C))

5 days

Forced Air Oven Cure (@ 350 ° F (176.6 ° C))

30 minutes

*Coating must be dry to touch prior to oven curing.

Common Applications

  • Engine headers
  • Engine manifolds
  • Exhaust pipes
  • Heat shields
  • Exhaust mufflers
  • Catalytic converters
  • Aircraft engine mounts

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.