Release

AT 1671

ALPHATEK NON-STICK INDUSTRIAL BLADE

AT 1671 – ALPHATEK NON-STICK INDUSTRIAL BLADE

Overview

AT 1671 is a high performance, single component coating specifically designed to maximize the performance of cutting surfaces and blades. AT 1671 creates a thin ceramic barrier that reduces friction and improves cutting efficiency. Coated blades will resist the build up of glues and other adhesives keeping the cutting surface clean and effective. AT 1671 is easily applied by wipe in ambient conditions.

Proudly manufactured in the USA.

IndustriesIndustrial

Tech Specs

Color
Clear
Viscosity
12 sec. #2 Zahn
Percent of Solids (%)
12
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F (648.8°C)
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Protects cutting edges from erosion and corrosion, thereby reducing maintenance and downtime
Resists build-up of glues and other adhesive type materials
Reduces friction resulting in more efficient cutting performance
Increase usable life of cutting equipment
Creates a covalent bond to the substrate giving it an intrinsic bond to the cutting blade for maximum long term durability
Contains no “free silicones” to contaminate finished products
Works equally well on straight cutters or slitter wheel knives
Clear finish
Thin application
Excellent coverage rate
Easily applied by wiping
Ambient cure, short dry time
Environmentally friendly. VOC exempt.
RoHS and REACH compliant

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 3 microns

Estimated Coverage Rate (@ 3 microns)

1,630 ft² (40 m²/Liter) per gallon

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Exposure to a warmer air flow (not exceeding 110°F) will accelerate drying times.

Supplemental Information

AT 1670 is an excellent base sealer for used blades with rougher surfaces. AT 1670 will smooth out the cutting surfaces prior to the application of AT 1671. AT 1671 may be used with or without the base sealer.

Common Applications

  • Any type of industrial cutting blade, slitter, knife, razor, shear, etc.

Related products.

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.