Release

AT 2600

ALPHATEK MOLD RELEASE

AT 2600 – ALPHATEK MOLD RELEASE

Overview

AT 2600 - AlphaTek Mold Release coating revolutionizes composites manufacturing. It maximize ROI via a simple to apply coating that improves both the efficiency and longevity of molds. It results in faster cycle times due to easier release. AT 2600 drives more cycles without cleaning or re-coating. No free silicones means no contamination of molded components. AT 2600 works with all common high temperature resin systems and all common industrial-molding technologies.

Proudly manufactured in the USA.

Tech Specs

Color
Clear
Viscosity
12 sec. #2 Zahn
Percent of Solids (%)
12
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F (648.8°C)
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

High performance single component mold release film.
Easy application. May be wiped on and ambient air cured.
Creates a covalent bond to the substrate giving it an intrinsic bond to the mold.
Inert (benign) material.
Excellent release properties with all common high temperature cured resin systems (e.g. epoxy, BMI, polyurethane, and polyimide).
Very low transfer (contamination) to the molded part. No free silicones.
Excels at releasing difficult substrates from complex mold geometries.
High suitability for no rubber-to-metal bonding.
Low levels of in-mold build-up/fouling.
Many releases (high durability) between applications.
Applicable to all common molding processes.
High temperature resistance.
Available with black light tracer to ensure 100% coverage.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 3 microns

Estimated Coverage Rate (@ 3 microns)

1,630 ft² (150 m²) per gallon

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Exposure to a warmer air flow (not exceeding 110°F) will accelerate drying and curing

Supplemental Information

AT 2600(BL) is available with black light tracer for easily inspecting coating coverage once applied.

Common Applications

All common molding and composite manufacturing processes

Related products.

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.