Release

AT 1670

ALPHATEK NON-STICK INDUSTRIAL BLADE BASE

AT 1670 – ALPHATEK NON-STICK INDUSTRIAL BLADE BASE

Overview

AT 1670 is a high performance, single component coating specifically designed to protect and revitalize industrial blades. It creates a thin, incredibly durable ceramic protective layer on cutting surfaces. It revitalizes cutting surfaces by smoothing out imperfections caused by past corrosion pitting, uneven abrasion wear and general wear & tear. This creates a sharper, more efficient cutting surface. Secondly, the ceramic surface coating will protect the blade from future damage. The overall result is a sharper, more efficient cutting tool that performs better, lasts longer and requires less maintenance. AT 1670 is easily applied by wipe in ambient conditions.

Proudly manufactured in the USA

IndustriesIndustrial

Tech Specs

Color
Clear
Viscosity
16-18 sec. #2 Zahn
Percent of Solids (%)
18
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F (648.8°C)
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8-9h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Smoothens rough blade surfaces & reduces friction for maximum cutting performance
Protects cutting edges from erosion and corrosion, thereby reducing maintenance and downtime
Increase usable life of cutting equipment
Creates a covalent bond to the substrate giving it an intrinsic bond to the cutting blade for maximum long term durability
Contains no “free silicones” to contaminate finished products
Clear finish
Thin application
Excellent coverage rate
Easily applied by wiping
Ambient cure, short dry time
Environmentally friendly. VOC exempt.
RoHS and REACH compliant

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 3 microns

Estimated Coverage Rate (@ 3 microns)

2,450 ft² (60 m²/Liter) per gallon

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Exposure to a warmer air flow (not exceeding 110°F) will accelerate drying times.

Supplemental Information

AT 1671 can be used as a topcoat to create a “super slick” finish that will further improve cutting performance and longevity.

Common Applications

  • Any type of industrial cutting blade, slitter, knife, razor, shear, etc.

Related products.

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.