Protective

AT 1410

ALPHASHIELD ULTRA

AT 1410 – ALPHASHIELD ULTRA

Overview

AT 1410 - AlphaShield Ultra gun coating is the maximum performance protective coating for firearms available to the civilian market. The coating is tough, durable and provides long term protection against corrosion, weathering, and abrasion. It may be applied to metal and non-metal surfaces. Coating is thermally stable to extreme temperatures (1200°F+/648°C+) and it retains adhesion even after multiple thermal cycles. Unlike most competing products, AT 1410 also offers insulation performance in addition to high temperature protection.

Proudly manufactured in the USA.

IndustriesGuns & Firearms

Tech Specs

Color
Sol i d Tone Colors
Viscosity
16-16.3 sec. #2 Zahn
Percent of Solids (%)
46
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability. Resin (cured)
1200°F + / 648.8°C +
Conical Bond (1/4” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.05µ
Specific Gravity (ASTM D891-09)
0.9
Pencil Hardness (ASTM D3363)
9h +
Salt Fog Test (ASTM B117)
3500 hours
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

High performance single component coating.
Extreme adhesion. Forms covalent bond to the substrate giving it an intrinsic bond to surfaces
Very tough and durable.
Excellent UV, chemical and abrasion resistance
High anti-corrosion performance.
Extreme heat & flame resistance.
Unparalleled thermal insulation protection.
Easy to apply. Curable by ambient air (accelerated oven curing possible).
May be applied to metal and non-metal surfaces.
VOC exempt.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

5 to 25 microns (0.2 – 1 mil)

Estimated Coverage Rate (@ 15 microns)

1,250 ft² (116 m²) per gallon

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Warmer air flow (not exceeding 110°F) will decrease drying time

Ambient Cure (Full Properties)

5 days

Cure Time (@350°F)

30 – 40 minutes (average)

*Oven cure only after coating is dry to touch

Supplemental Information

Also available:

  • AT 1405 – AlphaShield Grip*
  • AT 1410 – AlphaShield Ultra for maximum performance
  • AT 1420 – AlphaShield Elite (military grade)
  • AT 1450 – AlphaShield Bore Coat (dry lubricant)

*Textured feel can also be added if desired.

**Available in a wide variety of colors.

Common Applications

Any firearm component that requires high temperature protection including suppressor, barrel, muzzle brake, rail and handgrip.

Related products.

AT 1450

ALPHASHIELD BORE COAT

AT 1450 is the ultimate protective coating for gun bores. It is easy to apply and creates a micron thin, protective ceramic coating on the bore. AT 1450 creates a permanent, significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. AT 1450 protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. AT 1450 is effective on all types of firearms including rifles, handguns, shotguns and muzzle-loaders.

Learn more ›

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.