Protective

AT 1455

ALPHASHIELD GUNS & FIREARMS

AT 1455 – ALPHASHIELD GUNS & FIREARMS

Overview

AT 1455 is the ultimate protective coating for gun and firearm parts. It is clear, slick, highly durable, and provides unmatched anti-corrosion protection. AT 1455 is the perfect non-oil lubricant for maximum long-term performance. The coating may be placed on virtually any polymer or metal component in a firearm. Coated surfaces will not collect dust or grime like with oiled components. Moving components will stay slick and efficient in even the most challenging environments. AT 1455 is easy to apply and a single application provides long lasting protection.

Proudly manufactured in the USA.

IndustriesGuns & Firearms

Tech Specs

Color
Clear
Viscosity
16-18 sec. #2 Zahn
Percent of Solids (%)
14
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F / 648.8°C
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

High performance, ambient air cured coating with easy wipe-on application.
Creates a covalent bond to the substrate to become a permanent part of the metallic structure.
Ultra-thin application will not negatively impact forearm performance.
Extremely tough & durable for long lasting high performance.
Extreme high temperature resistance, including to direct flame.
Excellent corrosion resistance.
Dry lubrication properties work with or without the use of oil.
A single application provides long lasting performance.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 5 microns

Estimated Coverage Rate (@3 microns)

1,900 ft² (180 m²) per gallon

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Warm airflow will reduce drying time

Ambient Cure (Full Properties)

5 days

*Ambient cured properties normally exceed those of oven cure

Oven Cure (Convection Type Air Flow)

1200°F 30 minutes (Part Temperature)

Supplemental Information

AT 1455 does not require the additional use of lubricating oil. Oil may be applied without harming the AT 1455 coating.

Common Applications

Generally suitable for any firearm component where oil lubrication is commonly used including any moving component such as firing pin, magazine, etc.

Related products.

AT 1450

ALPHASHIELD BORE COAT

AT 1450 is the ultimate protective coating for gun bores. It is easy to apply and creates a micron thin, protective ceramic coating on the bore. AT 1450 creates a permanent, significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. AT 1450 protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. AT 1450 is effective on all types of firearms including rifles, handguns, shotguns and muzzle-loaders.

Learn more ›

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.