Protective

AT 602

MARBLE SHIELD

AT 602 – MARBLE SHIELD

Overview

AT–602 Marble Shield is a high performance, single component coating that creates a glossy, protective finish on granite, marble and similar surfaces. The hydrophobic properties repel water and dirt, making cleaning and maintenance easy while also extending the life of granite and marble surfaces. AT 602 protects treated surfaces from UV damage and most common chemicals. AT 602 creates a covalent bond to the substrate to provide long lasting protection. The coating does not sit on the surface but rather soaks in for long-term performance. AT 602 is an extremely safe, inert material when cured. It is safe for use on food contact surfaces. It is odor free once the coating has cured.

Proudly manufactured in the USA.

Tech Specs

Color
Clear
Viscosity
16-18 sec. #2 Zahn
Percent of Solids (%)
18
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F / 648.8°C
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Hydrophobic water repellent surface.
Self cleaning.
Clear.
UV resistance.
Excellent adhesion. Creates intrinsic bond with the substrate. Soaks into the substrate for maximum long-term performance.
Excellent coverage rate.
Easily applied by wipe.
Ambient cure, short dry time.
Environmentally friendly.
Safe for use on food surfaces.
Odor free once cured.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

3 to 5 microns

Estimated Coverage Rate (@3 microns)

2,450 ft² (230 m²) per gallon

*Will vary depending on surface

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Warm airflow will reduce drying time

Ambient Cure (Full Properties)

5 days

* Warm airflow will reduce curing time

Common Applications

  • Any granite, marble or stone surfaces.

Related products.

AT 1450

ALPHASHIELD BORE COAT

AT 1450 is the ultimate protective coating for gun bores. It is easy to apply and creates a micron thin, protective ceramic coating on the bore. AT 1450 creates a permanent, significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. AT 1450 protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. AT 1450 is effective on all types of firearms including rifles, handguns, shotguns and muzzle-loaders.

Learn more ›

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.