AT 1420

Overview
AT-1420 AlphaShield Elite is a high-performance nanoceramic firearm coating engineered for military small arms and crew-served weapon applications. Formulated to conform to the near-infrared (NIR) reflectance requirements of MIL-DTL-53039E, the AT-1420 supports night-vision signature management on military weapon systems while delivering exceptional thermal protection, durability, and corrosion resistance. Unlike conventional firearm coatings, the AT-1420 combines NIR signature management with high-temperature insulation performance.
Tested to 1,200°F (648°C), AT-1420 maintains coating integrity under sustained high-temperature conditions where conventional firearm coatings fail. It offers superior wear and corrosion resistance under the wide variety of adverse environmental conditions likely to be encountered in all theaters of operation.
AT-1420 is available exclusively to military and law enforcement agencies.
Proudly manufactured in the USA.
Tech Specs
- Color
- Solid Tone Colors
- Viscosity
- 16-16.3 sec. #2 Zahn
- Percent of Solids (%)
- 46
- V.O.C
- Exempt per CFR 51.1 / Regulation 8
- RoHS
- Compliant
- REACH
- Compliant
- Halogens
- None
- Thermal Stability. Resin (cured)
- 1200°F + / 648.8°C +
- Conical Bond (1/4” Mandrel) (ASTM D522-93a)
- Passed
- Cross Cut Adhesion (ASTM D3359)
- 5B
- Coefficient of Friction (ASTM D2047)
- 0.05µ
- Specific Gravity (ASTM D891-09)
- 0.9
- Pencil Hardness (ASTM D3363)
- 9h +
- Salt Fog Test (ASTM B117)
- 3500 hours
- Odor (liquid)
- Slight Solvent
- Odor (cured)
- None
Key Performance Properties
Drying and Coverage Rate
Average Applied Dry Film Thickness
5 to 25 microns (0.2 – 1 mil)
Estimated Coverage Rate (@ 15 microns)
1,250 ft² (116 m²) per gallon
Dry to Touch Time (@ 77°F / 25°C)
15 – 25 minutes (average)
*Exposing to a warmer air flow (not exceeding 110°F) will decrease dry time
Ambient Cure (Full Properties)
5 days
Cure Time (@350°F)
30 – 40 minutes (average)
*Oven cure only after coating is dry to touch
Supplemental Information
Also available:
- AT 1405 – AlphaShield Grip*
- AT 1410 – AlphaShield Ultra for maximum performance
- AT 1420 – AlphaShield Elite (military grade)
- AT 1450 – AlphaShield Bore Coat (dry lubricant)
*Textured feel can also be added if desired.
**Available in a wide variety of colors.
Common Applications
Any firearm component that requires high temperature protection including suppressor, barrel, muzzle brake, rail and handgrip.
Related products.
Ready to order?
Contact your AlphaTek representative to find the best coating for your requirements.







