AT 603

Overview
AT 603 - Marble Shield Extreme is an even higher performing version of AT 602 specifically created for professional use. The coating creates a glossy, protective finish on granite, marble and similar surfaces. The hydrophobic properties repel water and dirt making cleaning and maintenance easy while also extending the life of granite and marble surfaces. AT 603 protects treated surfaces from UV damage and most common chemicals. AT 603 creates a covalent bond to the substrate to provide long lasting protection. The coating does not sit on the surface but rather soaks in for long-term performance. AT 603 is an extremely safe, inert material when cured. It is safe for use on food contact surfaces. It is odor free once the coating has cured.
Proudly manufactured in the USA.
Tech Specs
- Color
- Clear
- Viscosity
- 16-18 sec. #2 Zahn
- Percent of Solids (%)
- 24
- V.O.C
- Exempt per CFR 51.1 / Regulation 8
- RoHS
- Compliant
- REACH
- Compliant
- Halogens
- None
- Thermal Stability (cured)
- 1200°F / 648.8°C
- Conical Bond (1/8” Mandrel) (ASTM D522-93a)
- Passed
- Cross Cut Adhesion (ASTM D3359)
- 5B
- Coefficient of Friction (ASTM D2047)
- 0.03µ
- Specific Gravity (ASTM D891-09)
- 0.889
- Pencil Hardness (ASTM D3363)
- 8h
- Odor (liquid)
- Slight Solvent
- Odor (cured)
- None
Key Performance Properties
Drying and Coverage Rate
Average Applied Dry Film Thickness
3 to 5 microns
Estimated Coverage Rate (@3 microns)
3,250 ft² (300 m²) per gallon
*Will vary depending on surface
Dry to Touch Time (@ 77°F / 25°C)
15 – 25 minutes (average)
*Warm airflow will reduce drying time
Ambient Cure (Full Properties)
5 days
* Accelerated curing possible
Common Applications
- Any granite, marble or stone surfaces.
Supplemental Information
AT 603 is a higher solids version of AT 602 and has been formulated for maximum performance on heavily used surfaces. Contact your AlphaTek representative to determine the solution best for your requirements.
Related products.
Ready to order?
Contact your AlphaTek representative to find the best coating for your requirements.







