Protective

AT 601

WOOD SHIELD

AT 601 – WOOD SHIELD

Overview

AT 601 - Wood Shield is a VOC exempt, environmentally friendly solvent based hydrophobic coating specifically formulated for maximum performance on wood surfaces. AT 601 is UV resistant and highly durable. AT 601 is extremely hydrophobic making it an ideal water repellant coating. Treated wood surfaces will repel water, ice, snow, dirt, etc. thereby reducing maintenance and extending the life of wood finishes. AT 601 absorbs deeply into the pores of wood surfaces for long lasting protection and a glossy finish. AT 601 is also very effective as a sealer over existing wood finishes. AT 601 is odor free once cured and is safe for use in marine environments.

Proudly manufactured in the USA.

Tech Specs

Color
Clear
Viscosity
16-18 sec. #2 Zahn
Percent of Solids (%)
18
V.O.C
Exempt per CFR 51.1 / Regulation 8
RoHS
Compliant
REACH
Compliant
Halogens
None
Thermal Stability (cured)
1200°F / 648.8°C
Conical Bond (1/8” Mandrel) (ASTM D522-93a)
Passed
Cross Cut Adhesion (ASTM D3359)
5B
Coefficient of Friction (ASTM D2047)
0.03µ
Specific Gravity (ASTM D891-09)
0.889
Pencil Hardness (ASTM D3363)
8h
Odor (liquid)
Slight Solvent
Odor (cured)
None

Key Performance Properties

Hydrophobic, water repellent surface.
Self cleaning.
Anti-icing.
UV resistance.
Chemical resistance.
Clear.
Excellent adhesion.
Absorbs into wood fibers for long lasting protection.
Excellent coverage rate.
Ambient cure, short dry time.
Easily applied with a lint-free cloth or pad.
Environmentally friendly. VOC exempt. Will not harm marine life.
RoHS and REACH compliant.

Drying and Coverage Rate

Average Applied Dry Film Thickness

2 to 5 microns

Estimated Coverage Rate (@3 microns)

2,450 ft² (230 m²) per gallon

*Will vary depending on surface

Dry to Touch Time (@ 77°F / 25°C)

15 – 25 minutes (average)

*Warm airflow will reduce drying time

Ambient Cure (Full Properties)

5 days

Common Applications

  • Wood cabinets
  • Wood table tops
  • Wood gun stocks
  • Wood furniture
  • Marine deck rails
  • Butcher blocks
  • Stair hand rails

Related products.

AT 1450

ALPHASHIELD BORE COAT

AT 1450 is the ultimate protective coating for gun bores. It is easy to apply and creates a micron thin, protective ceramic coating on the bore. AT 1450 creates a permanent, significant reduction in fouling (jacket, powder, lead, plastic wad, carbon) thereby reducing maintenance while maximizing the performance and longevity of your weapon. The coating is so thin that it will not negatively impact velocity, point of impact, or group size. Coated bores will need cleaning significantly less often and cleaning itself is much easier. AT 1450 protects against both galvanic and chemical corrosion. A single application will last the useful life of the bore for many firearms. AT 1450 is effective on all types of firearms including rifles, handguns, shotguns and muzzle-loaders.

Learn more ›

Ready to order?

Contact your AlphaTek representative to find the best coating for your requirements.