| Color | Clear |
| Viscosity | 12 sec. #2 Zahn |
| Percent of Solids (%) | 16 |
| V.O.C | Exempt per CFR 51.1 / Regulation 8 |
| RoHS | Compliant |
| REACH | Compliant |
| Halogens | None |
| Thermal Stability (cured) | 1200°F / 648.8°C |
| Conical Bond (1/8” Mandrel) (ASTM D522-93a) | Passed |
| Cross Cut Adhesion (ASTM D3359) | 5B |
| Coefficient of Friction (ASTM D2047) | 0.03µ |
| Specific Gravity (ASTM D891-09) | 0.889 |
| Pencil Hardness (ASTM D3363) | 8h |
| Odor (liquid) | Slight Solvent |
| Odor (cured) | None |
- Overview
- Technical Data
- Key Performance Properties
- Drying and Coverage Rate
- Supplemental Information
- Common Applications
- Resources
AT 5008 - ALPHASLICK SCREEN
AT-5008 is specifically formulated for screen or mesh type materials that require extreme hydrophobicity while allowing the passage of air. It is an easy to apply nano-ceramic finish that makes treated surfaces extremely slick/hydrophobic. It has excellent self-cleaning properties because dirt, ice or snow will not attach to the hydrophobic surface. The dry film is optically clear and will not cloud or discolor most substrates. AT-5008 dries very quickly making it excellent for high speed commercial applications. Once cured, AT-5008 provides excellent UV protection and can withstand extreme hot and cold temperatures, making it the perfect solution for protecting a wide variety of surfaces from weathering.
Proudly manufactured in the USA.
- Hydrophobic, water repellent surface
- Breathable
- Self cleaning
- Anti-icing
- UV resistance
- Excellent adhesion. Creates intrinsic bond with the substrate.
- Clear
- Non-flammable
- Excellent coverage rate
- Ambient cure, short dry time
- Easy to apply by spray or dip.
- Environmentally friendly.
- VOC exempt.
- Will not harm marine life.
- RoHS compliant.
- REACH compliant
| Average Applied Dry Film Thickness | 2 to 3 microns |
| Estimated Coverage Rate (@ 2 microns) | 3,260 ft² (300 m²) per gallon |
|
Dry to Touch Time (@ 77°F / 25°C) *Warmer air flow (not exceeding 110°F) will reduce drying and full cure time |
5 – 10 minutes (average) |
|
Ambient Cure (Full Properties) *After curing is complete, wash before use. |
12 hours |
The AT-5000 Series includes multiple high performance hydrophobic protective coatings designed for different end uses and a variety of slick, wet grip and textured finishes. Contact your AlphaTek representative to find the best coating for your requirements.
- Any screen or mesh material that requires a hydrophobic surface.
