| Color | Clear |
| Viscosity | 16-18 sec. #2 Zahn |
| Percent of Solids (%) | 19 |
| V.O.C | Exempt per CFR 51.1 / Regulation 8 |
| RoHS | Compliant |
| REACH | Compliant |
| Halogens | None |
| Thermal Stability (cured) | 1200°F / 648.8°C |
| Conical Bond (1/8” Mandrel) (ASTM D522-93a) | Passed |
| Cross Cut Adhesion (ASTM D3359) | 5B |
| Coefficient of Friction (ASTM D2047) | 0.03µ |
| Specific Gravity (ASTM D891-09) | 0.889 |
| Pencil Hardness (ASTM D3363) | 8h |
| Odor (liquid) | Slight Solvent |
| Odor (cured) | None |
- Overview
- Technical Data
- Key Performance Properties
- Drying and Coverage Rate
- Common Applications
- Supplemental Information
- Resources
AT 5005 - ALPHASLICK ULTRA WET GRIP
AT-5005 AlphaSlick Ultra Wet Grip is a VOC exempt, environmentally friendly solvent based hydrophobic coating specifically formulated for maximum performance on PVC, rubber and similar surfaces. AT-5005 is UV resistant and highly durable. It creates an extremely hydrophobic surface that resists the attachment of marine organisms, dirt, debris, ice, snow, water, etc. Once treated, the self-cleaning surface maximizes performance while minimizing ongoing maintenance. When wet, AT-5005 creates a smooth Wet-Grip non-slip surface perfect for areas requiring traction but that are often exposed to water. AT-5005 is the perfect solution for inflatable topside marine applications where traction is required in wet environments.
Proudly manufactured in the USA.
- Hydrophobic, water repellent surface.
- Wet-Grip non-slip surface when wet.
- Self cleaning.
- Anti-icing.
- UV resistance.
- Excellent adhesion. Creates intrinsic bond with the substrate.
- Clear.
- Non-flammable.
- Excellent coverage rate.
- Ambient cure, short dry time.
- Environmentally friendly. VOC exempt. Will not harm marine life.
- RoHS and REACH compliant.
| Average Applied Dry Film Thickness | 2 to 5 microns |
| Estimated Coverage Rate (@ 3 microns) | 2,580 ft² (240 m²) per gallon |
|
Dry to Touch Time (@ 77°F / 25°C) *Warmer air flow (not exceeding 110°F) will reduce drying and full cure times |
15 – 25 minutes (average) |
|
Ambient Cure (Full Properties) *Exposure to direct sunlight or warmer ambient air will reduce time required to reach a fully cross-linked cure |
24 hours |
- Boats
- Marine ladder steps and hand rails
- Gangways
- Swim decks
- Shower floors
- Tub floors
The AT – 5000 Series includes multiple high performance hydrophobic protective coatings designed for different end uses and a variety of slick, wet grip and textured finishes. Contact your AlphaTek representative to find the best coating for your requirements.
