| Color | Clear |
| Viscosity | 16-18 sec. #2 Zahn |
| Percent of Solids (%) | 19 |
| V.O.C | Exempt per CFR 51.1 / Regulation 8 |
| RoHS | Compliant |
| REACH | Compliant |
| Halogens | None |
| Thermal Stability (cured) | 1200°F / 648.8°C |
| Conical Bond (1/8” Mandrel) (ASTM D522-93a) | Passed |
| Cross Cut Adhesion (ASTM D3359) | 5B |
| Coefficient of Friction (ASTM D2047) | 0.03µ |
| Specific Gravity (ASTM D891-09) | 0.889 |
| Pencil Hardness (ASTM D3363) | 8h |
| Odor (liquid) | Slight Solvent |
| Odor (cured) | None |
- Overview
- Technical Data
- Key Performance Properties
- Drying and Coverage Rate
- Common Applications
- Supplemental Information
- Resources
AT 5007 - ALPHASLICK ULTRA TEXTURED WET GRIP
AT - 5007 AlphaSlick Ultra Textured Non-Slip is an environmentally friendly hydrophobic coating specifically formulated for maximum performance on rubber, PVC, and similar surfaces. AT - 5007 is UV resistant and highly durable. It creates an extremely hydrophobic surface that resists the attachment of marine organisms, dirt, debris, ice, snow, water, etc. The self-cleaning surface maximizes performance while minimizing maintenance. AT - 5007 combines a clear textured surface with AlphaTek’s Wet-Grip technology to create the highest performing non-slip surface in both wet and dry conditions. AT - 5007 is hydrophobic and therefore perfect for any wet environment. AT - 5007 is an inert (benign) material when cured and will not harm marine life or waterways.
Proudly manufactured in the USA.
- Hydrophobic, water repellent surface
- Textured Wet-Grip non-slip surface
- Self cleaning
- Anti-icing
- UV resistance
- Excellent adhesion. Creates intrinsic bond with the substrate.
- Clear
- Non-flammable
- Excellent coverage rate
- Ambient cure, short dry time
- Environmentally friendly. VOC exempt. Will not harm marine life.
- RoHS and REACH compliant
| Average Applied Dry Film Thickness | 2 to 5 microns |
| Estimated Coverage Rate (@3 microns) | 2,580 ft² (240 m²) per gallon |
|
Dry to Touch Time (@ 77°F / 25°C) *Warmer air flow (not exceeding 110°F) will reduce “DTTT” and full cure time |
15 – 25 minutes (average) |
|
Ambient Cure (Full Properties) *Exposure to direct sunlight or warmer ambient air will reduce tie required to reach a fully cross-linked cure |
24 hours |
- Boats
- Marine ladder steps and hand rails
- Gangways
- Swim decks
- Shower floors
- Tub floors
The AT – 5000 Series includes multiple high performance hydrophobic protective coatings designed for different end uses and a variety of slick, wet grip and textured finishes. Contact your AlphaTek representative to find the best coating for your requirements.
